Are your Leak Detection services available in New Boston?

Yes, Masters Plumbing Service provides round-the-clock Leak Detection services directly in New Boston, TX.

How much does emergency service cost in New Boston?

We offer upfront, transparent pricing with no hidden fees for all service calls in New Boston.

🔍 Non-Invasive Detection Technology

Stop Guessing Where the Leak Is — Call Masters Plumbing Service in New Boston, TX

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

A water bill that jumped 30% with no change in usage. A ceiling stain that keeps reappearing after patches. A soft spot in the flooring with no visible source. These are signs of a hidden leak that's been running long enough to cause structural damage — and every day it runs is money lost and damage accumulating. Masters Plumbing Service uses acoustic ground microphones, thermal imaging cameras, and precision pressure testing in New Boston, TX to locate leaks without speculative demolition.

📞 Call +1-855-718-1500 — Find Your Leak Today

Acoustic Ground Microphones Thermal Infrared Cameras Pressure Decay Testing Slab & Wall Leak Specialists

Licensed Leak Detection service in New Boston, TX - Masters Plumbing Service

Our Detection Methods

The Tools Behind Accurate Leak Detection in New Boston, TX

No single detection method works for every leak scenario. Our technicians are trained on four distinct approaches and select the right tool — or combination of tools — based on the pipe type, building construction, and leak characteristics.

🎙️

Acoustic Ground Microphone

Acoustic detection is most effective on metal pipe (copper, cast iron) under slab or in concrete — materials that conduct sound efficiently. It works in quiet environments and requires shutting off the house briefly to establish a clean acoustic baseline.

🌡️

Infrared Thermal Camera

Thermal imaging is particularly effective inside insulated wall cavities and for finding the extent of moisture spread beyond the immediate leak point. It tells us not just where the pipe is failing but how far the moisture has already traveled.

📉

Pressure Decay Testing

We isolate the supply system, pressurize it to operating pressure, and monitor pressure over a timed hold period. Any pressure drop confirms active water loss from the supply side. By isolating zones — hot side vs. cold side, section by section — we narrow down which branch of the supply system is leaking before the detection phase begins.

💨

Tracer Gas Detection

Tracer gas detection is the method of last resort for the most challenging cases — it adds cost and setup time. We use it when acoustic and thermal methods haven't produced a definitive location and the evidence clearly supports an active leak.

What We Locate

Every Leak Detection Scenario We Handle in New Boston, TX

Hidden leaks occur in different locations throughout a property — each requiring a slightly different detection approach. Here's how we handle the most common scenarios in New Boston, TX.

Under Slab

Slab Leak Detection

Supply lines run under or through the concrete slab in most slab-on-grade homes. When these lines fail — from corrosion, shifting, or manufacturing defects — the leak is invisible from the surface but audible to acoustic equipment. We walk the floor on a grid pattern, map the loudest detection points, and triangulate to a specific floor location, typically within a square foot.

In-Wall

In-Wall & Ceiling Leak Detection

Wall and ceiling leaks are often traced by following a visible stain to its apparent high point — but the visible damage can be several feet from the actual pipe failure due to how water travels down framing members. Thermal imaging reveals the wet zone accurately, and acoustic equipment confirms the pipe location within the wall cavity.

Water Main

Underground Supply Line Detection

We mark the ground above the detected leak location so the repair crew opens only the section they need to.

Pool & Irrigation

Pool Line & Irrigation Leak Detection

Pool plumbing — suction and return lines buried between the equipment pad and the pool shell — can develop leaks at fittings or in the pipe body that appear as unexplained water loss. We pressure-test the pool plumbing circuit, isolate the return and suction lines separately, and use acoustic detection to find which line and where.

Commercial

Commercial Property Leak Detection

Multi-story buildings, commercial kitchens, retail spaces, and industrial properties have complex pipe networks where a supply or drain leak can go undetected through multiple floors before surfacing. We approach commercial detection systematically — zone by zone pressure isolation, thermal scan of suspect surfaces, and acoustic confirmation.

Documentation

Leak Detection Report for Insurance

Insurance claims for water damage from hidden leaks typically require documentation that the leak was not visible or detectable without specialized equipment. Our detection report includes: pressure test results confirming active water loss, detection method used, thermal imagery or acoustic mapping showing leak location, and technician certification information.

📞 Call +1-855-718-1500 — Locate Your Leak

Our Process

Our Systematic Leak Detection Approach in New Boston

Here's exactly how a Masters Plumbing Service leak detection call plays out.

Initial Water Loss Confirmation

This step confirms we're looking for a real leak rather than meter error or a normal appliance cycling.

Zone Isolation & Pressure Decay

We isolate the supply system into zones — hot side, cold side, and if possible, individual branches — and pressure-test each zone to determine which branch is losing water. This narrows the area of active search significantly before detection equipment is deployed.

Detection Equipment Deployment

We document findings with thermal images and note detection readings at multiple grid points to triangulate the strongest signal.

Written Report & Repair Options

Insurance claims: the report is formatted to support a claim for water damage from a concealed leak. We can provide supplemental documentation on request.

Customer Reviews

New Boston, TX Homeowners Who Found Their Leak with Masters Plumbing Service

★★★★★

High-efficiency home with a leak that defied normal detection. Water loss was slow — about 1.5 gallons per hour. The tech used tracer gas after pressure testing confirmed the loss but acoustic detection couldn't localize it clearly. Gas detection found the escape at a micro-fitting under the slab in the utility corridor. Impressive work.

— C. Thornton, New Boston

★★★★★

Our insurance company required professional leak detection documentation before approving the claim. Masters Plumbing Service's written report with pressure test data and thermal imagery was exactly what the adjuster needed. Claim approved. The detection cost was covered as part of the claim.

— B. Osei, New Boston, TX

★★★★★

Pool was losing 2 inches of water per day — more than evaporation could explain. Masters Plumbing Service pressure-tested the plumbing circuit, isolated the issue to the return line, and ran acoustic detection along the line path to find the failure at a union fitting under the decking. Repair required pulling one deck board instead of the exploratory digging another company had proposed. Excellent, focused work.

— T. Anand, New Boston, TX

Trusted Leak Detection service in New Boston, TX - Masters Plumbing Service

Common Questions

Leak Detection Questions We Answer in New Boston

Secondary indicators: water stains appearing or recurring in the same area without an obvious source; mold or mildew smell in rooms without a plumbing fixture; soft or discolored flooring; consistent sound of running water in walls when all fixtures are off.

The repair itself requires physical pipe access, which typically means a small, targeted opening. But that's a completely different proposition from opening large wall sections while searching for an unknown leak location.

For leaks in plastic pipe, low-pressure situations, or high-noise environments, accuracy may be lower and tracer gas becomes the preferred supplemental method.

Yes. Our written detection report includes: technician credentials, equipment identification, pressure test methodology and results, detection method description, leak location with reference measurements, and supporting thermal imagery. This is the documentation format most insurance adjusters require to approve a concealed-leak water damage claim.

A standard residential leak detection — confirming water loss, isolating the failing zone, and deploying detection equipment to locate the failure — typically takes 1.5–2.5 hours. More complex scenarios (multi-zone commercial, large properties, very slow leaks requiring tracer gas) can run 3–4 hours.

Yes — and for most residential leaks, we can repair the failure the same day detection confirms the location. Our service trucks carry the repair materials for the most common supply line failures. We quote the repair as a flat-rate job separate from the detection fee, and you decide whether to proceed with us or take the detection report to your own plumber.

Stop Guessing Where the Leak Is — Call Masters Plumbing Service in New Boston, TX